Custom Copper Knurled Inserts - Precision Threaded Parts from China Suppliers and Factory
Product Specifications
| Parameter | Specifications |
| Part Type | Knurled Insert (through-hole, blind, flanged, unflanged) |
| Material Options | C11000 Electrolytic Tough Pitch Copper, C14500 Tellurium Copper, Brass, or Custom Alloys |
| Manufacturing Process | CNC Turning + Knurling + Threading + Drilling (single setup) |
| Knurl Patterns | Straight, Diamond (fine 0.5mm pitch / medium 1.0mm / coarse 1.5mm+), Cross-Knurl |
| Thread Types | Internal: Metric (M2-M20), UNC, UNF, BSP, NPT, or custom |
| Surface Treatment | Ultrasonic Cleaning (standard); Nickel, Tin, or Silver Plating (optional) |
| Dimensional Tolerance | ±0.01 mm (turned body), ±0.02 mm (knurl diameter) |
| Thread Class | 6H internal (standard), 4H or 5H upon request |
| Typical Outer Diameter | 3 mm to 50 mm |
| Production Volume | Prototype to high volume (100,000+ pieces) |
| Typical Applications | Injection-molded assemblies, 3D-printed parts, electrical terminals, fluid connectors, heat-set inserts |
| Quality Standards | ISO 9001, full dimensional inspection, pull-out & torque test reports |
Product Display
Applications & Use Scenarios
These copper knurled inserts serve as permanent, reusable threaded anchors in plastic, composite, and metal assemblies, providing strong mechanical retention and excellent electrical/thermal contact.
Copper’s high conductivity makes these inserts ideal for grounding terminals, PCB mounting posts, and bus bar connection points. The knurled body grips the plastic housing tightly while the internal thread provides a reliable electrical bond.
Inserts can be heat-staked, ultrasonically installed, or press-fitted into thermoplastics. The uniform knurl pattern resists both pull-out and rotational forces, preserving thread integrity over repeated assembly cycles.
Tellurium copper inserts with tin or nickel plating provide durable threaded connections inside battery housings, bus bars, and sensor mounts, where corrosion resistance and current-carrying capacity are both critical.
Threaded copper inserts are used in manifolds, valve bodies, and pump housings for fluid and pneumatic connections. The clean internal threads ensure leak-free sealing with tapered fittings.
Brass or copper inserts with a polished, burr-free finish are used in diagnostic devices and lab equipment, where clean threads and dimensional accuracy are essential.
Manufacturing Process Overview
Copper alloy rod is selected based on conductivity and machinability requirements. All incoming material is tested for alloy composition using XRF analysis.
The bar is turned to the precise outer diameter and face length, with flanges or steps cut as per the drawing.
A dedicated knurling tool produces the specified pattern — straight or diamond — under controlled feed and pressure. Knurl depth and pitch are measured in-process.
The central hole is drilled, and the internal thread is tapped or single-point cut to the required class. Chamfers are applied at the hole entry.
The finished insert is parted from the bar, and all edges — especially around the knurl and thread starts — are carefully deburred.
Parts go through a multi-stage ultrasonic bath to remove all copper chips, knurling dust, and machining oils.
If specified, the cleaned inserts are sent to our plating line for electroless nickel, tin, or silver coating.
100% visual check and dimensional sampling. Thread Go/No-Go gauge test, knurl form inspection, and pull-out/torque tests on sample batches.
Inserts are packed in labeled bags or boxes with desiccant, ready for immediate assembly.
Quality Control
Positive material identification (PMI) via XRF, tensile and conductivity verification when required.
OD, knurl pitch and depth, hole diameter, and thread pitch are measured at defined intervals.
Statistical sampling per AQL: knurl OD measurement, Go/No-Go thread gauge, visual inspection for burrs and surface defects.
Pull-out and rotational torque tests are performed on heat-staked or press-fit samples when specified by the customer.
Material certificates, dimensional reports, and test results are provided with every shipment.
Installation & Handling
- 1. Pre-heat the insert or the plastic host to the recommended temperature (typically 150–250°C depending on plastic type).
- 2. Align the insert squarely with the hole and press in with a controlled force. The heated plastic flows into the knurl grooves, creating a strong mechanical lock.
- 3. Allow the assembly to cool naturally without disturbance. Do not apply load until the plastic has fully resolidified.
- 1. Ensure the receiving hole is drilled to the recommended interference-fit diameter.
- 2. Use an arbor press and a flat-faced punch to drive the insert straight into the hole. Never hammer on the insert directly.
- 3. Check that the insert is fully seated and the flange (if present) is flush with the surface.
- Copper is relatively soft; handle carefully to avoid dents or scratches on the knurled surface.
- For electrical applications, keep contact surfaces clean and free of oxidation. If plating is not specified, a light antioxidant coating can be applied during storage.
Key Product Advantages
Our controlled process delivers uniform, sharp knurl patterns that maximize grip and resist pull-out and rotation, even in high-stress applications.
Pure copper offers unmatched electrical and thermal conductivity, while tellurium copper combines conductivity with excellent machinability for complex geometries.
Knurling, threading, and drilling in one clamping guarantees perfect concentricity between the knurled body and the internal thread — critical for repeated fastener engagement.
Whether you order 1,000 or 100,000 inserts, our automated lines and strict process controls ensure every piece meets the same exacting standard.
Ultrasonic cleaning removes all residues, so inserts arrive ready for immediate installation or plating, with no additional cleaning required.
Our team can advise on knurl type, material selection, and thread design to optimize performance for your specific application.
Frequently Asked Questions
Q:What materials are available for custom knurled inserts?
We offer C11000 Electrolytic Tough Pitch Copper, C14500 Tellurium Copper, Brass, or custom alloys based on your conductivity, corrosion resistance, and machining requirements.
Q:What are the standard thread types and classes you support?
We manufacture internal threads including Metric (M2-M20), UNC, UNF, BSP, NPT, or custom threads. The standard thread class is 6H, and 4H or 5H classes can be accommodated upon request.
Q:How do knurled copper inserts perform in thermoplastic parts?
When installed via heat-staking or ultrasonic processes, the surrounding plastic melts and flows into the straight or diamond knurl patterns. This creates a strong mechanical lock that offers high resistance to pull-out and rotational torque.
Q:What surface treatments or plating options do you offer?
Our standard treatment is a multi-stage ultrasonic cleaning to remove all machining oils and debris. For enhanced corrosion resistance or electrical performance, optional plating choices include electroless nickel, tin, or silver.
Q:What quality assurance documentation is provided with shipments?
Every shipment is backed by ISO 9001 standards. We provide comprehensive quality assurance documentation including material certificates, dimensional inspection reports, and pull-out/torque test reports upon request.
