Custom High Hardness Iron Parts from China Suppliers - Precision Wire EDM and CNC Machined Factory Solutions
Product Specifications
| Parameter | Specifications |
| Material | Iron / Carbon Steel (custom grades available) |
| Manufacturing Process | Wire EDM + CNC Machining (Drilling, Tapping, Boring) |
| Heat Treatment | Quenching & Tempering, Hardness > 45 HRC (up to 58 HRC) |
| Surface Finish | Clean machined, ready for optional coating or plating |
| Dimensional Tolerance | ±0.005 mm (wire EDM), ±0.01 mm (machined features) |
| Hole Position Accuracy | ±0.01 mm |
| Typical Features | Through holes, blind holes, threaded holes, slots, complex profiles |
| Part Size Range | Up to 300 mm length, 200 mm width, 150 mm thickness |
| Typical Applications | Tooling, molds, fixtures, industrial machinery, automotive parts |
| Quality Standards | ISO 9001, full dimensional inspection, hardness test report |
Product Display
Applications & Use Scenarios
These high-hardness iron components are engineered for applications where wear resistance, dimensional stability, and precision are critical.
Tooling & Fixtures
Used for drill jigs, locating pins, wear plates, and alignment blocks that must maintain accuracy under repeated use.
Industrial Machinery
Suitable for cams, levers, ratchets, and linkage parts that endure sliding contact and impact loads, where the 45+ HRC hardness extends service life.
Automotive Components
Ideal for custom brackets, spacers, and sensor mounts that require robust strength and precise hole patterns for assembly.
Mold & Die Applications
Wire EDM is perfectly suited for creating die inserts, punch plates, and form tooling with complex profiles and high hardness for stamping or injection processes.
Manufacturing Process Overview
Material Selection
High-grade iron or carbon steel blanks are inspected for composition and uniformity, ensuring consistent response to heat treatment.
Wire EDM Shaping
The external geometry and any complex internal cutouts are precisely profiled using wire EDM, achieving tight tolerances and stress-free cuts.
CNC Machining
Holes are center-drilled, then drilled to size, followed by reaming for precision bores or tapping for threads. Counterbores and chamfers are also completed at this stage.
Deburring & Cleaning
All machined edges and hole entries are deburred to remove sharp corners, and the part is thoroughly cleaned.
Heat Treatment
The part is heated in a controlled atmosphere furnace, quenched to achieve target hardness, then tempered to the specified value. Hardness is verified at multiple points.
Final Inspection
100% dimensional verification using CMM and optical measurement systems. Hardness testing performed and recorded. Surface quality visually inspected.
Quality Control
Incoming Material
Spectrometer check for alloy composition; grain structure assessment.
In-Process
Critical dimensions measured after wire EDM and again after CNC machining to ensure no drift.
Heat Treatment Verification
Rockwell hardness testing at multiple locations, with process charts provided.
Final Inspection
Full CMM layout for complex geometries, thread gauge check, surface roughness measurement if required.
Documentation
Material certificate, dimensional report, and hardness test certificate supplied with each batch.
Installation & Handling
Pre-Installation Check
Verify all dimensions and hole alignments against your assembly drawing. The clean, hard surface should be free of any protective residues.
Fit Trial
Test-fit the part with mating components. The precise holes should align perfectly with dowels and fasteners.
Fastening
Use recommended torque values for threaded fasteners. The hardened material provides strong thread engagement without stripping.
Lubrication
For sliding or rotating applications, apply a suitable grease or oil film on contact surfaces to reduce friction and prevent corrosion.
Maintenance
Periodically inspect for wear, particularly on contact edges. The high hardness ensures long intervals between replacements.
Key Product Advantages
Dual-Process Precision
Wire EDM provides stress-free, ultra-precise external profiles, while CNC machining delivers accurate hole patterns and threaded features — the best of both technologies in one part.
High Hardness Durability
With heat treatment achieving 45 HRC or higher, these parts resist wear, deformation, and galling under heavy use, drastically extending service life.
Complex Geometry Capable
Wire EDM can cut shapes impossible for conventional milling, including sharp internal corners and fine slots, giving you complete design freedom.
Consistent Quality
Every part is individually hardness-tested and dimensionally verified, ensuring each component performs exactly as engineered.
Full Customization
We accept any custom drawing, any batch size. Our engineers can recommend the optimal material grade and heat treatment profile for your specific application.
Frequently Asked Questions
We primarily manufacture using high-grade Iron and Carbon Steel. Custom grades are also available to match your specific engineering requirements.
Through quenching and tempering, we achieve a surface and core hardness of 45 HRC up to 58 HRC, offering superior wear resistance and durability.
We achieve tolerances of ±0.005 mm for wire EDM features and ±0.01 mm for CNC machined features, with hole position accuracy within ±0.01 mm.
Yes. Our Wire EDM process allows for stress-free cutting of intricate geometries, including sharp internal corners and fine slots that conventional milling cannot produce.
Yes, we provide full quality documentation with each batch, including material certificates, dimensional inspection reports, and hardness test certificates.
Our typical size capacity is up to 300 mm in length, 200 mm in width, and 150 mm in thickness. Please contact us for custom requests outside this range.
