Leave Your Message
AI Helps Write

Custom High Hardness Iron Parts Supplier in China - Precision Wire EDM & CNC Machining Factory

,

Process & Capability:
As leading suppliers in China, our factory specializes in the production of custom iron components utilizing a cutting-edge combination of wire EDM and CNC machining. The wire EDM process enables us to create complex external geometries, precise internal corners, and intricate profiles with zero tooling stress and micron-level accuracy. Following that, our CNC machining centers precisely drill, tap, and ream holes, bores, threads, and counterbores to meet exact specifications. This hybrid manufacturing process allows us to achieve tight tolerances and exceptional features on even the most complex designs, ensuring our parts satisfy stringent engineering standards.

,

Material & Surface Treatment:
We utilize high-quality iron and carbon steel, renowned for their excellent machinability and heat treatment responsiveness. After the initial machining phase, our components undergo controlled quenching and tempering processes to achieve a consistent hardness of 45 HRC or higher, significantly augmenting their wear resistance and strength. The final surface finish is clean and smooth, a result of our precision machining and heat treatment processes, making the parts ready for additional coating, plating, or direct integration into high-load mechanical assemblies.

,

    Product Specifications

    Parameter Specifications
    Material Iron / Carbon Steel (custom grades available)
    Manufacturing Process Wire EDM + CNC Machining (Drilling, Tapping, Boring)
    Heat Treatment Quenching & Tempering, Hardness > 45 HRC (up to 58 HRC)
    Surface Finish Clean machined, ready for optional coating or plating
    Dimensional Tolerance ±0.005 mm (wire EDM), ±0.01 mm (machined features)
    Hole Position Accuracy ±0.01 mm
    Typical Features Through holes, blind holes, threaded holes, slots, complex profiles
    Part Size Range Up to 300 mm length, 200 mm width, 150 mm thickness
    Typical Applications Tooling, molds, fixtures, industrial machinery, automotive parts
    Quality Standards ISO 9001, full dimensional inspection, hardness test report

    Product Display

    Custom High Hardness Iron Parts Precision Wire EDM and CNC Machined (2)
    Custom High Hardness Iron Parts Precision Wire EDM and CNC Machined (3)

    Applications & Use Scenarios

    These high-hardness iron components are engineered for applications where wear resistance, dimensional stability, and precision are critical.

    Tooling & Fixtures

    Used for drill jigs, locating pins, wear plates, and alignment blocks that must maintain accuracy under repeated use.

    Industrial Machinery

    Suitable for cams, levers, ratchets, and linkage parts that endure sliding contact and impact loads, where the 45+ HRC hardness extends service life.

    Automotive Components

    Ideal for custom brackets, spacers, and sensor mounts that require robust strength and precise hole patterns for assembly.

    Mold & Die Applications

    Wire EDM is perfectly suited for creating die inserts, punch plates, and form tooling with complex profiles and high hardness for stamping or injection processes.

    Manufacturing Process Overview

    1
    Material Selection

    High-grade iron or carbon steel blanks are inspected for composition and uniformity, ensuring consistent response to heat treatment.

    2
    Wire EDM Shaping

    The external geometry and any complex internal cutouts are precisely profiled using wire EDM, achieving tight tolerances and stress-free cuts.

    3
    CNC Machining

    Holes are center-drilled, then drilled to size, followed by reaming for precision bores or tapping for threads. Counterbores and chamfers are also completed at this stage.

    4
    Deburring & Cleaning

    All machined edges and hole entries are deburred to remove sharp corners, and the part is thoroughly cleaned.

    5
    Heat Treatment

    The part is heated in a controlled atmosphere furnace, quenched to achieve target hardness, then tempered to the specified value. Hardness is verified at multiple points.

    6
    Final Inspection

    100% dimensional verification using CMM and optical measurement systems. Hardness testing performed and recorded. Surface quality visually inspected.

    Quality Control

    Incoming Material

    Spectrometer check for alloy composition; grain structure assessment.

    In-Process

    Critical dimensions measured after wire EDM and again after CNC machining to ensure no drift.

    Heat Treatment Verification

    Rockwell hardness testing at multiple locations, with process charts provided.

    Final Inspection

    Full CMM layout for complex geometries, thread gauge check, surface roughness measurement if required.

    Documentation

    Material certificate, dimensional report, and hardness test certificate supplied with each batch.

    Installation & Handling

    1
    Pre-Installation Check

    Verify all dimensions and hole alignments against your assembly drawing. The clean, hard surface should be free of any protective residues.

    2
    Fit Trial

    Test-fit the part with mating components. The precise holes should align perfectly with dowels and fasteners.

    3
    Fastening

    Use recommended torque values for threaded fasteners. The hardened material provides strong thread engagement without stripping.

    4
    Lubrication

    For sliding or rotating applications, apply a suitable grease or oil film on contact surfaces to reduce friction and prevent corrosion.

    5
    Maintenance

    Periodically inspect for wear, particularly on contact edges. The high hardness ensures long intervals between replacements.

    Key Product Advantages

    Dual-Process Precision

    Wire EDM provides stress-free, ultra-precise external profiles, while CNC machining delivers accurate hole patterns and threaded features — the best of both technologies in one part.

    High Hardness Durability

    With heat treatment achieving 45 HRC or higher, these parts resist wear, deformation, and galling under heavy use, drastically extending service life.

    Complex Geometry Capable

    Wire EDM can cut shapes impossible for conventional milling, including sharp internal corners and fine slots, giving you complete design freedom.

    Consistent Quality

    Every part is individually hardness-tested and dimensionally verified, ensuring each component performs exactly as engineered.

    Full Customization

    We accept any custom drawing, any batch size. Our engineers can recommend the optimal material grade and heat treatment profile for your specific application.

    Frequently Asked Questions

    1. What materials can be used for these precision parts?

    We primarily use high-grade Iron and Carbon Steel for these components, and we also offer custom grades to suit your specific application requirements.

    2. What kind of manufacturing tolerances can you achieve?

    By combining Wire EDM and CNC machining, we can achieve dimensional tolerances of ±0.005 mm for wire EDM features and ±0.01 mm for machined features, with a hole position accuracy of ±0.01 mm.

    3. What is the typical hardness level after heat treatment?

    Through our controlled quenching and tempering processes, we achieve a verified hardness greater than 45 HRC, and up to 58 HRC, which provides excellent wear resistance and durability.

    4. What quality control documentation do you provide?

    Every batch of parts is supplied with a comprehensive documentation package, including a material certificate, a full dimensional inspection report, and a hardness test certificate.

    5. Can you produce parts with complex geometries?

    Yes. The use of Wire EDM allows us to cut complex internal and external profiles, including sharp internal corners and fine slots that are difficult or impossible to achieve with conventional milling.

    6. What size range of parts can you manufacture?

    Our standard part size capacity ranges up to 300 mm in length, 200 mm in width, and 150 mm in thickness. Please contact us for custom dimensions outside this range.