Leave Your Message
AI Helps Write

High Precision 316L Stainless Steel Shaft with Threads and Holes

Process & Capability:
This high precision shaft is fully machined on advanced CNC machining centers in a single setup, ensuring exceptional concentricity and positional accuracy. Every thread is single-point cut or precisely tapped, every hole is center-drilled and reamed to exact specifications, and all diameters are turned to tight tolerances. The one-clamping workflow eliminates cumulative alignment errors, delivering a shaft where threaded sections, drilled holes, and bearing journals all run perfectly true to the same centerline. This is precision machining at its most demanding level.

Material & Surface Treatment:
The shaft is manufactured from premium 316L stainless steel, chosen for its superior corrosion resistance in chloride-rich, marine, and chemical environments. After machining, the part undergoes thorough ultrasonic cleaning to remove all cutting fluids, chips, and residues, leaving a perfectly clean, burr-free surface. The natural passivated finish of 316L is preserved, providing a smooth, professional appearance and a surface ready for immediate installation or further specialized processing as required by your application.

    Product Specifications

    Parameter Specifications
    Material Stainless Steel 316L (1.4404)
    Manufacturing Process CNC Machining Center (Turning, Drilling, Threading, Reaming)
    Surface Treatment Ultrasonic Cleaning, Degreased
    Thread Types External threads (single-point cut), Internal threads (tapped),Metric, UNC, UNF, Custom
    Hole Features Through holes, blind holes, cross-drilled holes, counterbores
    Dimensional Tolerance +0.005 mm (diameters), 0.01 mm (lengths)
    Thread Class 6g external, 6H internal, or tighter upon request
    Concentricity ≤ 0.01 mm
    Hole Position Accuracy ±0.02 mm
    Surface Roughness Ra ≤ 0.4 um (bearing journals), Ra ≤ 0.8 um (general)
    Shaft Diameter Range 3 mm to 80 mm
    Shaft Length Range Up to 600 mm
    Typical Applications Precision instruments, medical devices, pumps, valves,automation, robotics
    Quality Standards ISO 9001, full CMM inspection report, material certificate

    Product Display

    High Precision 316L Stainless Steel Shaft with Threads and Holes (2)
    High Precision 316L Stainless Steel Shaft with Threads and Holes (3)
    High Precision 316L Stainless Steel Shaft with Threads and Holes (4)

    Applications & Use Scenarios

    This high precision 316L shaft with threaded and drilled features is engineered for applications where accuracy, corrosion resistance, and multifunctional integration are critical.

    Medical & Laboratory Equipment: Precision shafts for surgical instruments, diagnostic machines, and laboratory automation where 316L biocompatibility and tight tolerances ensure reliable, contamination-free operation.

    Pump & Valve Assemblies: Shafts with integrated threaded ends and cross-drilled holes for fluid pathways, sensor ports, or locking mechanisms. The 316L material resists aggressive chemicals and saline solutions.

    Robotics & Automation: Drive shafts, actuator rods, and guide shafts with precise bearing journals and mounting holes that maintain positional accuracy under continuous motion.

    Marine & Chemical Processing: The 316L stainless steel provides outstanding resistance to saltwater and corrosive chemicals, making these shafts ideal for underwater equipment, chemical dosing pumps, and offshore instrumentation.

    Precision Instruments: Custom shafts for optical systems, measuring equipment, and calibration devices where micron-level accuracy is non-negotiable.

    Manufacturing Process Overview

    1. Material Verification: 316L bar stock is inspected for chemical composition using XRF analysis and verified against mill certificates.

    2. CNC Turning: The shaft outer profile, including all bearing journals, shoulders, and steps, is turned to final dimensions with finishing passes achieving the specified surface roughness.

    3. Thread Cutting: External threads are single-point cut on the CNC lathe for perfect concentricity with the shaft centerline. Internal threads in end holes are precisely tapped.

    4. Drilling: Cross-holes, through holes, and blind holes are center-drilled, then drilled to size, and reamed if precision bores are required. All hole positions are verified against the drawing.

    5. Deburring & Edge Finishing: All sharp edges, thread starts, and hole entries are carefully deburred to remove any loose material.

    6. Ultrasonic Cleaning: The completed shaft is thoroughly degreased and ultrasonically cleaned to eliminate all machining residues.

    7. Final Inspection: Full dimensional layout using CMM, thread gauge verification, concentricity measurement, and surface roughness testing. Every shaft is individually inspected.

    Quality Control 

    Incoming Material: Spectrometer analysis of 316L composition; mechanical property verification.

    In-Process Measurement: Critical diameters and thread pitch monitored during production.

    Final Inspection: Full CMM dimensional inspection of all features; concentricity and runout measurement; thread Go/No-Go gauge verification; surface roughness profilometer testing; 100% visual inspection under 5x magnification.

    Documentation: Material certificate, full dimensional inspection report, and certificate of conformity supplied with every order.

    Installation & Handling

    1.Receiving Inspection: Check the shaft for any transit damage. Verify all dimensions against the supplied inspection report using calibrated instruments.

    2.Cleaning: Although shipped ultrasonically clean, wipe the shaft with isopropyl alcohol and a lint-free cloth before installation to remove any airborne dust.

    3.Fit Verification: Test-fit bearings, gears, or pulleys onto their respective journals. The precisely ground surfaces should provide a smooth, accurate fit.

    4.Thread Assembly: Apply an appropriate anti-seize compound to threads if the shaft will be used in a corrosive environment. Hand-start all threaded fasteners to prevent cross-threading.

    5.Alignment Check: After installation, rotate the shaft slowly and measure runout at multiple points using a dial indicator to confirm proper alignment.

    6.Storage: If not immediately installed, store the shaft in a clean, dry environment with corrosion-inhibiting packaging.

    Key Product Advantages

    Single-Setup Precision: All turning, threading, and drilling are completed on one CNC machining center, guaranteeing that every feature is perfectly concentric and accurately positioned relative to the shaft centerline.

    316L Corrosion Resistance: The molybdenum-bearing 316L stainless steel far outperforms standard 304 in chloride, saltwater, and chemical environments, making these shafts suitable for the most demanding applications.

    High Accuracy Threads: Single-point cut external threads are perfectly aligned with the shaft axis, eliminating wobble and uneven loading in threaded assemblies. Thread class 6g or tighter is standard.

    Integrated Multi-Feature Design: Combining bearing journals, threaded sections, and precisely located holes on a single shaft simplifies your assembly design and reduces part count.

    Complete Quality Assurance: Every shaft receives full CMM inspection and is shipped with complete documentation, giving you full confidence in every dimension.

    contact us

    Need a Consultation? Contact Us 24/7

    AI Helps Write