Precision Bearing Assembly with Iron Housing - CNC Machined by Leading China Suppliers and Factory
Product Specifications
| Parameter | Specifications |
| Assembly Type | Precision bearing with custom iron housing |
| Housing Material | High-grade iron (cast or billet as required) |
| Bearing Type | Deep groove ball, angular contact, or custom |
| Bearing Precision Grade | P4, P5, or equivalent upon request |
| Manufacturing Process | CNC machining (housing) + precision assembly |
| Housing Surface Treatment | Cleaning and anti-rust oil (standard); black oxide, painting, powder coating (optional) |
| Housing Dimensional Tolerance | ±0.01 mm (bearing bore), ±0.02 mm (mounting surfaces) |
| Runout After Assembly | ≤ 0.01 mm (depending on bearing grade) |
| Typical Sizes | Custom - ID, OD, and flange dimensions per drawing |
| Order Quantity | Single prototype to production batches |
| Typical Applications | Robotics, machine tools, precision instruments, linear motion systems, custom machinery |
| Quality Standards | ISO 9001, full dimensional inspection, runout test report |
Product Display
Applications & Use Scenarios
These high-precision bearing assemblies are engineered for applications where smooth rotation, accurate positioning, and rigid support are essential.
Manufacturing Process Overview
Quality Control
Installation & Handling
Key Product Advantages
Frequently Asked Questions (FAQ)
We primarily use high-grade iron, including cast iron and solid billet iron depending on the structural stiffness, damping, and volume requirements of your application.
Yes, we support precision grades including P4, P5, or equivalent upon request, with tight bore tolerances of ±0.01 mm and total assembly runout ≤ 0.01 mm.
Standard protection includes thorough ultrasonic cleaning with anti-rust oil. Optional finishes include black oxide, protective painting, and powder coating for enhanced environmental resistance.
We support flexible manufacturing volumes, ranging from a single prototype for R&D validation up to mass production batches.
Each shipment can include ISO 9001 certified full dimensional inspection reports (CMM), material certificates, and bearing runout test reports.
Yes, all housing geometries, bolt hole configurations, spigot alignments, and mounting dimensions are fully customized to your CAD drawings and specifications.
| Parameter | Specifications |
|---|---|
| Assembly Type | Precision bearing with custom iron housing |
| Housing Material | High-grade iron (cast or billet as required) |
| Bearing Type | Deep groove ball, angular contact, or custom |
| Bearing Precision Grade | P4, P5, or equivalent upon request |
| Manufacturing Process | CNC machining (housing) + precision assembly |
| Housing Surface Treatment | Cleaning and anti-rust oil (standard); black oxide, painting, powder coating (optional) |
| Housing Dimensional Tolerance | ±0.01 mm (bearing bore), ±0.02 mm (mounting surfaces) |
| Runout After Assembly | ≤ 0.01 mm (depending on bearing grade) |
| Typical Sizes | Custom - ID, OD, and flange dimensions per drawing |
| Order Quantity | Single prototype to production batches |
| Typical Applications | Robotics, machine tools, precision instruments, linear motion systems, custom machinery |
| Quality Standards | ISO 9001, full dimensional inspection, runout test report |
These high-precision bearing assemblies are engineered for applications where smooth rotation, accurate positioning, and rigid support are essential.
Joint supports, pulley mounts, and actuator pivot points benefit from the integrated iron housing’s stiffness and the high-precision bearing’s low friction, ensuring repeatable motion.
The assembly can serve as a compact spindle cartridge or support bearing unit, with tightly controlled bore tolerances contributing to overall system accuracy.
Optical stages, measurement equipment, and alignment rigs rely on the low runout and clean, custom-fit design to maintain calibration.
By offering fully customized dimensions and bearing specs, we enable machine builders to develop unique motion solutions without compromising on quality or lead time.
We review your bearing and housing requirements. Iron stock or casting is verified and prepared.
The housing is machined on a CNC mill or turn-mill center, with the bearing bore, mounting faces, bolt holes, and any alignment features produced in one or two setups to guarantee geometric accuracy.
All machined edges are deburred, and the housing is ultrasonically cleaned to remove chips and coolant.
The housing receives anti-rust oil or an optional finish (e.g., black oxide) as specified.
The specified high-precision bearing is pressed or heat-fitted into the bore using controlled methods. Preload and axial play are set according to your technical requirements.
The completed assembly is rotated slowly while runout is measured with a dial indicator. Fit, clearance, and smoothness are verified.
Dimensional check of critical mounting interfaces, visual inspection, and protective packaging for shipment.
CMM verification of bearing bore diameter, roundness, and mounting face flatness before assembly.
Incoming bearings are checked for grade markings and measured for bore and OD if custom spec.
Press force and alignment are monitored; temperature control is used for shrink-fit applications.
Runout measurement using a dial indicator; rotational torque check; visual inspection for surface defects.
Material certificate, housing dimensional report, and final assembly inspection report provided.
Confirm the assembly’s mounting dimensions and bearing type match your design. Keep protective wrapping on until installation.
Wipe the housing mounting face and the machine base with a solvent to remove any anti-rust oil and ensure solid contact.
Bolt the housing to your structure using the recommended torque sequence. The precisely machined mounting face ensures squareness.
Carefully insert the mating shaft into the bearing bore. For tight fits, use a pressing tool that applies force only to the inner ring.
After installation, rotate the shaft and check runout with a dial indicator to confirm the assembly is correctly seated.
Apply the specified grease or oil to the bearing if not pre-lubricated, then run at low speed initially to distribute lubricant.
You receive a fully assembled, tested unit — no need to source and fit housings and bearings separately, saving you time and ensuring compatibility.
The CNC machined iron housing provides a rigid, dimensionally accurate bore that preserves the bearing’s inherent precision, delivering low runout and long service life.
Housings are machined to your exact dimensions, including non-standard flange patterns, bolt circles, or special spigot features, supporting truly bespoke designs.
Choose from anti-rust oil for basic protection, or black oxide and paint for enhanced corrosion resistance and aesthetics.
Our team can help you specify the optimal bearing grade and housing geometry for your load, speed, and precision requirements, ensuring a successful integration.
