Precision Custom Aluminum Automotive Parts | China Suppliers & Factory | Black Anodized CNC Machined Components
Product Specifications
| Parameter | Specifications |
| Part Types | Brackets, mounts, spacers, sensor housings, adapters, custom structural parts |
| Material | Aluminum 6061-T6, 7075-T6 (or custom grades) |
| Manufacturing Process | CNC Machining Center (3-axis, 4-axis, 5-axis as required) |
| Surface Treatment | Black Anodized (MIL-A-8625 Type II or Type III) |
| Surface Hardness | Up to 60 HRC equivalent on anodized layer (Type III) |
| Dimensional Tolerance | ±0.01 mm (machined features) |
| Surface Roughness | Ra ≤ 0.8 μm before anodizing |
| Typical Applications | Engine bay brackets, suspension spacers, sensor mounts, interior structural parts |
| Production Volume | Prototype to series production |
| File Formats Accepted | STEP, IGES, DXF, PDF, DWG |
| Quality Standards | ISO 9001, full dimensional inspection, material & finish certificates |
Product Display
Applications & Use Scenarios
These black anodized aluminum parts are designed for automotive applications where weight, precision, and durability are equally important.
Engine Bay & Powertrain
Custom brackets and mounts that hold ECUs, wiring harnesses, or fluid reservoirs must withstand heat, vibration, and occasional chemical exposure. The black anodized finish resists fuel, oil, and coolant while maintaining a clean appearance.
Suspension & Chassis
Precision spacers, alignment shims, and adapters machined to tight tolerances ensure accurate suspension geometry. The hard anodized layer protects against stone chips and corrosion from road salt.
Interior & Dashboard
Sensor housings, display brackets, and structural inserts with a uniform black finish match OEM interior aesthetics while providing lightweight strength.
Electric Vehicle Components
Battery pack spacers, bus bar supports, and cooling system mounts benefit from aluminum’s thermal conductivity and the electrical insulation provided by the anodized layer.
Manufacturing Process Overview
-
1
Design Review: Our engineers check your CAD model for manufacturability and optimize toolpaths for the CNC machining center.
-
2
Material Preparation: Certified aluminum plate or bar is cut to size, and alloy composition is verified.
-
3
CNC Machining: The part is machined from a solid billet on a multi‑axis machining center. All holes, threads, pockets, and profiles are completed in one or two setups to maintain positional accuracy.
-
4
Deburring & Cleaning: Sharp edges are removed, and the part is thoroughly cleaned to eliminate chips and cutting fluid.
-
5
Black Anodizing: The part is immersed in an electrolytic bath where a controlled oxide layer is grown and dyed black. The layer is then sealed to lock in the color and maximize corrosion resistance.
-
6
Final Inspection: Critical dimensions are verified on a CMM, anodize thickness is measured, and surface uniformity is visually checked.
-
7
Packaging: Parts are individually wrapped or placed in custom trays to prevent handling marks during shipping.
Quality Control
-
✓
Incoming Material: XRF analysis to confirm aluminum alloy grade.
-
✓
In‑Process Checks: Key dimensions are measured during machining runs to detect any tool wear early.
-
✓
Anodize Inspection: Coating thickness is verified with an eddy‑current gauge; color uniformity is checked under calibrated lighting.
-
✓
Final Inspection: Full dimensional report, thread gauge testing, and visual inspection for any surface defects.
-
✓
Documentation: Material certificate, anodize process certificate, and dimensional report supplied with every order.
Installation & Handling
-
1
Unpack Carefully: The black anodized surface is hard but can show scratches if handled roughly. Use clean gloves.
-
2
Pre‑Installation Check: Verify all dimensions and thread fits against the supplied inspection report.
-
3
Fit Trial: Test‑fit the part in its intended location before final tightening. The precisely machined surfaces should align perfectly with mating components.
-
4
Fastening: Use the specified torque values. The black anodized surface provides a clean, non‑reflective background for assembly inspection.
-
5
Maintenance: Anodized aluminum is corrosion‑resistant; however, avoid prolonged contact with strong alkaline cleaners, as these can attack the anodized layer.
Key Product Advantages
-
✓
Single‑Setup CNC Machining: All features are machined on one machining center, ensuring perfect positional accuracy and eliminating tolerance stacking.
-
✓
Lightweight Strength: Aluminum alloy construction reduces vehicle weight without sacrificing structural integrity.
-
✓
Durable Black Anodized Finish: The anodized layer provides hard, corrosion‑resistant, non‑conductive protection that will not peel or flake.
-
✓
Automotive‑Grade Precision: Tolerances of ±0.01 mm meet the strict requirements of modern automotive systems.
-
✓
Full Customization: Every part is built to your drawing, with complete freedom of design and material selection.
-
✓
Fast Prototyping: Direct CAD‑to‑part workflow delivers first articles in as little as 5 business days, accelerating your development cycle.
Frequently Asked Questions
We primarily use high-strength Aluminum 6061-T6 and 7075-T6. However, custom aluminum grades can also be sourced and processed depending on your specific application and design requirements.
Type II is standard anodizing, ideal for decorative finishes with excellent corrosion resistance. Type III is hard anodizing, which creates a thicker oxide layer providing superior wear resistance and surface hardness up to 60 HRC equivalent.
Our multi-axis CNC machining centers can reliably achieve tight dimensional tolerances of ±0.01 mm on key features, ensuring parts align perfectly with OEM or custom mating components.
We accept standard CAD and technical drawing formats including STEP, IGES, DXF, PDF, and DWG. Sending 3D models alongside 2D PDFs for tolerance callouts is highly recommended.
We operate under ISO 9001 standards. Every batch undergoes incoming material verification (XRF), in-process inspections, CMM dimensional reporting, and coating thickness checks. Full documentation is provided with your order.
Thanks to our direct CAD-to-part workflow, we can deliver fully machined and finished first-article prototypes in as little as 5 business days after design approval.
