Precision Custom Brass Components from China Suppliers - CNC Turn-Milled Parts with Threads and Holes from Factory
Product Specifications
| Parameter | Specifications |
| Material | Brass (C36000, C37700, or customer-specified alloy) |
| Manufacturing Process | CNC Turn-Mill (Combined Turning, Milling, Drilling, Tapping) |
| Surface Treatment | Ultrasonic Degreasing & Cleaning |
| Thread Options | External (single-point cut), Internal (tapped), Metric, UNC, UNF, BSP, NPT |
| Hole Options | Radial cross-holes, axial blind holes, stepped bores, vent paths |
| Tolerance Standard | ±0.01 mm on turned features; Class 6H/6g threads |
| Surface Finish | Ra 0.8 m or better (cleaned, as-machined) |
| Size Capability | Diameters from 2 mm to 200 mm; Lengths up to 600 mm |
| Order Quantity | Prototype, low-volume, and high-volume batches accepted |
| Typical Applications | Fluid power, electronics, instrumentation, plumbing, musical instruments |
| Quality Standards | ISO 9001, full dimensional reports, material traceability |
Product Display
Applications & Use Scenarios
Our threaded and drilled brass parts are found wherever precise fluid handling, reliable electrical connection, or fine mechanical adjustment is required.
Manifolds, adapters, and fittings with precision NPT or BSP threads for leak-free operation in compressed air, water, and low-pressure hydraulic systems. The natural corrosion resistance of brass adds long service life.
Connector shells, terminal blocks, and sensor bodies where brass ensures low contact resistance and easy solderability. Optional post-cleaning plating can further enhance surface conductivity.
Set screws, adjustment spindles, and calibration nuts with fine threads and small cross-drilled holes for locking wires or detent mechanisms.
One-off threaded bushings, custom spacers with locking holes, or specialized fittings for prototype builds and small-scale production runs.
Manufacturing Process Overview
Brass bar stock or forgings are checked for alloy grade using XRF analysis before being released to production.
Our CAM team generates efficient toolpaths that combine turning, face drilling, cross-drilling, and thread cutting in a single program.
The entire part is machined on a CNC turn-mill center. The main spindle turns the OD, while live tools drill holes and mill flats or slots — all without moving the workpiece.
Thread starts, hole edges, and sharp corners are hand-finished to ensure safe handling and clean assembly.
A multi-stage ultrasonic bath system removes all machining residues, leaving the brass surface bright and contaminant-free.
Critical dimensions are verified with a CMM, threads are checked with calibrated Go/No-Go gauges, and a final visual inspection is performed under magnification.
Clean parts are sealed in protective bags with desiccant to prevent tarnishing during shipment.
Quality Control
Positive material identification via XRF; hardness and tensile verification when required.
The first piece of every batch undergoes a full dimensional layout and is held as a reference sample.
Operators measure key diameters and thread features at defined intervals during the run.
100% dimensional check on critical features using CMM and optical measurement; thread gauge verification; visual check for burrs, scratches, or tarnish.
Material certificate, dimensional inspection report, and certificate of conformity shipped with each order.
Installation & Handling
Use clean gloves when handling to avoid tarnishing the bright brass surface.
A light wipe with isopropyl alcohol ensures any condensation from shipping is removed.
Always hand-start the part into its mating thread. For tapered pipe threads, apply PTFE tape or suitable sealant to the male thread only.
Use an appropriately sized wrench and tighten gradually. Brass threads can deform if over-torqued — follow recommended torque values.
If the part will be exposed to ammonia or strong alkaline solutions, consider specifying a protective plating, as brass can be susceptible to stress corrosion cracking in such environments.
Key Product Advantages
Machining in a single setup saves time, reduces cost, and guarantees perfect feature-to-feature alignment — there’s no accumulation of setup errors.
Threads are cut in the same clamping as the body, so they are perfectly concentric to the axis, reducing vibration and uneven wear in service.
Our ultrasonic cleaning process penetrates even the smallest cross-holes and deep threads, leaving parts assembly-ready right out of the package.
Choose any combination of thread standards, hole patterns, and overall dimensions — we treat every part as a custom project.
With in-house programming and a stock of common brass grades, we can deliver first articles in as fast as 3-5 business days.
Frequently Asked Questions
We primarily utilize high-quality Brass alloys, including C36000, C37700, or any other customer-specified brass alloy to meet your exact application requirements.
We offer extensive thread options including External (single-point cut), Internal (tapped), Metric, UNC, UNF, BSP, and NPT. Hole options include radial cross-holes, axial blind holes, stepped bores, and customized vent paths.
We achieve tight tolerances of ±0.01 mm on turned features and Class 6H/6g on threads. The standard surface finish is Ra 0.8 μm or better after ultrasonic cleaning.
By combining turning, milling, drilling, and tapping on a single machine without moving the workpiece, we eliminate setup alignment errors, guarantee perfect feature-to-feature concentricity, and lower overall production costs.
Every order is shipped with a comprehensive quality documentation package, which includes material certificates, dimensional inspection reports (CMM/optical measurement), and certificates of conformity.
